Off-road · 2026

Sherco 300 SE Factory ergonomics: seat height, rider triangle & fit

The Sherco 300 SE Factory has a 37.4 in seat. Here’s how riders of different sizes fit, and what you can change.

Seat height: 37.4 in
Wet weight: 248 lb
Wheelbase: 58.3 in
Power: 30.6 kW

Specs: EstimatedBars & pegs: EstimatedSeat width: Estimated

Try it with your measurements

Units

Your measurements

Height (in)

Inseam (in)

Arm length

Seated shoulder height

Boot sole

Preferred posture

Motorcycle

Modifications

Try common parts and see how they change your fit. The picture shows your setup over the stock bike.

Seat

Seat height0

Thicker or thinner seat. Lower makes it easier to reach the ground.

Lowering kit0

Lowers the whole bike. Easier to reach the ground, a little less legroom.

Handlebar

Bar risers0

Raises the bars. You sit more upright with less weight on your wrists.

Bar pullback0

Brings the bars closer to you. Shorter reach, good for shorter arms.

Footpegs

Lower pegs0

Lowers the footpegs. More knee room, less cramped legs.

Move pegs back0

Moves the pegs back (or forward). Further back feels sportier.

Windscreen

Windscreen height0

Taller or shorter screen. Changes how much wind hits your chest and helmet.

72Good fit

Specs: EstimatedBars & pegs: Estimated

Single · 293 cc · Hold W or Space to accelerate, ↑ / ↓ to change gear · Synthesised from the engine layout and firing order. Not a recording.

Original illustration, motorcycleergonomics.com

Fit score

72/100

Good fit

Knee 74°

Within range

Comfort 58–100°

Hip 116°

Within range

Comfort 82–118°

Elbow 134°

Within range

Comfort 110–165°

Back lean 6°

Within range

Comfort 0–25°

Ground reach

2.9 in short of flat feet

One foot flat, hips shifted

Seat height with sag: 34.4 in
Leg length needed: 35.7 in
Your inseam + boots: 32.8 in

Wind

Full wind on chest and helmet

Suggested fixes

Lowering links -1.8 in

Fit score 72 → 84

Find parts ↗
Low seat or reshaped foam -1.4 in

Fit score 72 → 80

Find parts ↗
Boots with a thicker sole +0.8 in

Fit score 72 → 79

Find parts ↗

Lowering changes handling and side-stand lean; check with a specialist.

Compare

Estimate. Handlebar and peg positions for this bike are estimated. Always sit on a bike before you buy it.

Fit by rider size

Shorter riders: at 5′4″ with a 29.5 in inseam, expect feet don’t reach the ground.
Taller riders: at 6′4″, knee angle is about 67°; fit score 92/100.

Rider	Inseam	Fit	Ground reach	Knee	Lean
5′1″	28.1 in	49	Feet don’t reach the ground	86°	11°
5′4″	29.5 in	54	Feet don’t reach the ground	81°	9°
5′7″	30.8 in	64	Tiptoes on one foot	77°	8°
5′10″	32.2 in	74	One foot flat, hips shifted	73°	6°
6′1″	33.5 in	83	One foot flat, hips shifted	70°	5°
6′4″	35 in	92	Both feet flat	67°	4°

Reference riders with average proportions and 20 mm boot soles. Your proportions may differ.

Spec sheet

Drawn to scale from this bike's geometry.

Geometry & specifications

Geometry & specifications	Value	Source
Seat height	37.4 in	Estimated
Seat width at the front	—	Estimated
Handlebar grip	17.3 in ahead of the seat, 7.5 in above it	Estimated
Footpeg	2.4 in ahead of the seat, 16.9 in off the ground	Estimated
Wheelbase	58.3 in	Estimated
Wet weight	248 lb	Estimated
Rake	26.5°	Estimated
Trail	4.3 in	Estimated
Engine	Single · 293 cc	Estimated
Power	30.6 kW	Estimated
Tyres	90/90-21 / 140/80-18	Estimated
Category	Off-road	Estimated