Touring · 2024

Harley-Davidson Street Glide ergonomics: seat height, rider triangle & fit

The Harley-Davidson Street Glide has a 28.1 in seat. Here’s how riders of different sizes fit, and what you can change.

Seat height: 28.1 in
Wet weight: 811 lb
Wheelbase: 64.0 in
Power: 78 kW

Specs: ManufacturerBars & pegs: Photo-tracedSeat width: Estimated

Try it with your measurements

Units

Your measurements

Height (in)

Inseam (in)

Arm length

Seated shoulder height

Boot sole

Preferred posture

Motorcycle

Modifications

Try common parts and see how they change your fit. The picture shows your setup over the stock bike.

Seat

Seat height0

Thicker or thinner seat. Lower makes it easier to reach the ground.

Lowering kit0

Lowers the whole bike. Easier to reach the ground, a little less legroom.

Handlebar

Bar risers0

Raises the bars. You sit more upright with less weight on your wrists.

Bar pullback0

Brings the bars closer to you. Shorter reach, good for shorter arms.

Footpegs

Lower pegs0

Lowers the footpegs. More knee room, less cramped legs.

Move pegs back0

Moves the pegs back (or forward). Further back feels sportier.

Windscreen

Windscreen height0

Taller or shorter screen. Changes how much wind hits your chest and helmet.

96Great fit

Specs: ManufacturerBars & pegs: Photo-traced

V-twin (45°) · 1923 cc · Hold W or Space to accelerate, ↑ / ↓ to change gear · Synthesised from the engine layout and firing order. Not a recording.

Original illustration, motorcycleergonomics.com

Fit score

96/100

Great fit

Knee 116°

Within range

Comfort 72–120°

Hip 100°

Within range

Comfort 85–130°

Elbow 149°

Within range

Comfort 125–176°

Back lean 1°

Within range

Comfort -12–10°

Ground reach

4.5 in to spare

Both feet flat, knees bent

Seat height with sag: 26.1 in
Leg length needed: 28.3 in
Your inseam + boots: 32.8 in

Wind

Turbulent air at helmet height (buffeting)

Suggested fixes

Taller windscreen +5.5 in

Wind: Helmet sheltered behind the screen

Find parts ↗

Compare

Estimate. Handlebar and peg positions for this bike are photo-traced. Always sit on a bike before you buy it.

Fit by rider size

Shorter riders: at 5′4″ with a 29.5 in inseam, expect both feet flat, knees bent.
Taller riders: at 6′4″, knee angle is about 102°; fit score 98/100.

Rider	Inseam	Fit	Ground reach	Knee	Lean
5′1″	28.1 in	65	Both feet flat	150°	7°
5′4″	29.5 in	67	Both feet flat, knees bent	133°	5°
5′7″	30.8 in	87	Both feet flat, knees bent	123°	3°
5′10″	32.2 in	96	Both feet flat, knees bent	114°	1°
6′1″	33.5 in	98	Both feet flat, knees bent	108°	-1°
6′4″	35 in	98	Both feet flat, knees bent	102°	-2°

Reference riders with average proportions and 20 mm boot soles. Your proportions may differ.

Spec sheet

Drawn to scale from this bike's geometry.

Geometry & specifications

Geometry & specifications	Value	Source
Seat height	28.1 in	Manufacturer
Seat height, laden	26.1 in	Manufacturer
Seat width at the front	14.2 in	Estimated
Handlebar grip	20.3 in ahead of the seat, 13.8 in above it	Photo-traced
Footpeg	22.0 in ahead of the seat, 8.4 in off the ground	Photo-traced
Wheelbase	64.0 in	Manufacturer
Wet weight	811 lb	Manufacturer
Rake	29.25°	Manufacturer
Trail	6.7 in	Manufacturer
Engine	V-twin (45°) · 1923 cc	Manufacturer
Power	78 kW	Manufacturer
Tyres	130/60-19 / 180/55-18	Manufacturer
Category	Touring	Manufacturer